◆ Uses peristaltic pump filling, 128x subdivision control, low vibration, high precision. Liquid only passes through the tubing and does not contact the pump body, minimizing secondary liquid contamination.

◆ Can fill beverages, liquor, daily chemicals, edible oil, soy milk, glue, nail polish, medicine, pesticides, and other liquids, as well as liquids with a certain viscosity or containing impurities.

◆ A variety of pump heads can be selected to meet various liquid filling needs.

◆ Rotary encoder switch with film button operation for easier user operation.

◆ Has a filling volume correction function.

◆ Has a back suction function, effectively preventing liquid dripping when filling viscous liquids.

◆ Reversible operation function, allowing the filling liquid to be recovered.

◆ Filling accuracy can reach up to ±0.4%.

◆ Foot switch control

◆ 304 stainless steel filling nozzle

◆ 304 stainless steel casing

◆ Wide range power supply, AC 90-260V, 50Hz/60Hz

Technical Parameters

Product Model	GR1-1BS	GR2-1BS
Number of Filling Nozzles	1	2
Speed Adjustment Range	1-600RPM
Speed Resolution	1RPM
Filling Function	Precise quantitative filling of liquid
Filling Volume Range	0.1mL-999L
Number of Fillings	1-9999 times (“0” for infinite cycle)
Filling Time Interval	0.1S-24Hr
Display Function	128×32 graphic dot matrix LCD display, flow rate and speed displayed simultaneously
Direction Control	Reversible operation function
Operating Method	Rotary encoder switch with film button operation for easier user operation.
Full Speed Function	The tubing can be quickly filled and emptied via the full speed button.
Power-Off Memory Function	Continues operation in the state before power off after power-on.
Back Suction Function	When operating in allocation mode, the pump reverses a certain angle after shutdown, effectively preventing liquid dripping.
Flow Rate Calibration Function	Automatic flow rate calibration function, flow rate accuracy up to ±0.5%
Allocation Volume Calibration Function	Input the actual allocation volume value to automatically perform allocation volume calibration, with dispensing accuracy up to ±0.5%
Foot Switch Function	Optional foot switch to control start/stop
Filling Bracket	Optional filling bracket for installing filling nozzle
Filling Nozzle	Various specifications of filling nozzles are optional, with nozzle inner diameters of 2.2mm, 2.5mm, 3mm, 4mm, and 6mm.
Power Consumption	70W
Applicable Power Supply	Wide voltage AC90-260V, 50Hz/60Hz
Working Environment	0-40℃, humidity <80% non-condensing
Driver Weight	4.8KG
Protection Level	IP31

Selection Guide

Filling Volume	Filling Time (Sec)	Filling Accuracy	Recommended Pump Head	Recommended Tubing
50uL	≥1.18	±3.5%	DG-1A	0.38×0.85
100uL	≥0.46	±2.0%		1×1
200uL	≥0.93	±1.2%		1×1
0.5mL	≥0.85	±1.2%		2×1
1mL	≥0.80	±1.0%	YZ15	14#
2 mL	≥0.64	±1.0%		16#
3 mL	≥0.97	±1.0%		16#
5 mL	≥0.82	±1.0%		25#
10 mL	≥0.80	±1.0%	YZ15	25#
20 mL	≥1.57	±0.8%		25#
30 mL	≥2.39	±0.5%		25#
50 mL	≥2.70	±0.5%	YZ15	25#
100mL	≥3.25	±0.4%	YZ15	17#

Filling machine	Applicable pump head	Number of pump head rollers	Optional number of pump heads	Tubes	Speed range (RPM)	Flow rate range (mL/min)
GR1(2)-1BS	YZ15	3	1,2	13#	1-600	0.08-46.10
				14#		0.27-178.1
				19#		0.52-336.9
				16#		0.86-556.2
				25#		1.8-1176.6
				17#		3.2-2111.6
				18#		4.1-2416
	YZ25	3	1,2	15#	1-600	1.7-1066.6
	YZ25	3	1,2	24#	1-600	2.9-1856

◆ The flow rate values in the table are measured data of silicone tubes, and a variety of imported tubes are optional.

◆ Using imported tubes can improve tube life and flow accuracy.

◆ For filling viscous liquids, it is recommended to use the YZ25 pump head.

GR1-1BS

Product Introduction

Technical Parameters

Selection Guide

Dimensions